The main table area:
VIKA AMON
combined with these legs:
VIKA KAJ
I’m using a 36” diagonal, which means I need 28.8×21.6.
This table is 47.25×23.625, giving me
9.1” clearance on the side edges and
1.0125 (Okay, a little over an inch) clearance on the top/bottom edges.
I’m most concerned about the strength of that inch… but it can be reinforced on the underside by a number of things. The table area is paper-filled, and thus might not be highest strength quality. It would only support half of my weight if I sat on it, in it’s un-altered condition. So I’m thinking that stripping away 26.1 of its 23.625 inches might considerably weaken it, or at least cause it to flex. Solid core tabletop would be ideal. Therefore, I’ll do some pricing at the ‘depot.
These adjustable legs are kinda nice, but again, it would be better to build something that has a place for the projector to slide in, and the mirror, and the camera. They go between 1.96’ to 2.947’. That adjustable feature is a win.
The budget for this is 20$ (top) + 60$ (four legs)=
80 bucks plus tax.
Can I find something better at a comparable price?
->TO DO: Home depot run. Price 10mm acrylic.